Powerlet Brackets and Accessories
 |
|
|
| |
This bracket fits a wide variety of applications. It has a 6mm clearance mounting hole and an 18mm socket hole. more here...
|
|
Quantity in Basket:
None
|
|
|
 |
|
|
| |
Holds 1 ATO fuse, 3 amp to 15 amp. Weatherproof!
Designed to last the lifetime of your vehicle this low cost fuse block provides a convenient means for powering GPS units, radar detectors and more more here...
|
|
Quantity in Basket:
None
|
|
|
 |
|
|
| |
Holds 4 ATO fuses, 3 amp to 15 amp.
Designed to last the lifetime of your vehicle this low cost fuse block provides a convenient means for powering GPS units, radar detectors and more. This unit c more here...
|
|
Quantity in Basket:
None
|
|
|
 |
|
|
| |
The rubber cap fits our standard cigar socket, providing protection from the elements when not in use. more here...
|
|
Quantity in Basket:
None
|
|
|
 |
|
|
| |
With two screw mount holes this clip provides a convenient way to hold the cigar end of any cable. Holds the socket when not in use. more here...
|
|
Quantity in Basket:
None
|
|
|
 |
|
|
| |
Mountable with a single screw. This clip provides a convenient way to hold a cable mount Powerlet socket. Holds the socket when not in use. more here...
|
|
Quantity in Basket:
None
|
|
|
 |
|
|
| |
When mounting a bracket to a rearset, this spacer is used on the second hole to keep the rearset straight. more here...
|
|
Quantity in Basket:
None
|
|
|
 |
|
|
| |
Perfect solution to keep foul weather out of a cable mounted socket. Slips directly over the end and is friction fit so it stays in place. The PMI-009 will also fit the PSO-004. more here...
|
|
Quantity in Basket:
None
|
|
|
| |
|
|
| |
This bracket fits a wide variety of applications. It has a 6mm clearance mounting hole and an 18mm socket hole. more here...
|
|
Quantity in Basket:
None
|
|
|
 |
|
|
| |
Our 1-1/8" To 1-1/4" Powerbar Plus provides a convenient outlet on any round handlebar or frame member. Simple bolt on solution provides a Powerlet outlet for heated clothing, battery charging, poweri more here...
|
|
Quantity in Basket:
None
|
|
|
 |
|
|
| |
Standard 7/8" To 1" Powerbars provide a convenient outlet on any round handlebar or frame member. Simple bolt on solution provides a Powerlet outlet for heated clothing, battery charging, powering Lug more here...
|
|
Quantity in Basket:
None
|
|
|
| |
|
|
| |
Standard 1-1/8" To 1-1/4" Powerbars provide a convenient outlet on any round handlebar or frame member. Simple bolt on solution provides a Powerlet outlet for heated clothing, battery charging, poweri more here...
|
|
Quantity in Basket:
None
|
|
|
 |
|
|
| |
Similar to the PBR-001 but has no clearance hole for the socket. Useful for mounting switches. Has a 6mm clearance hole for mounting. Available in black anodized finish. more here...
|
|
Quantity in Basket:
None
|
|
|
 |
|
|
| |
This bracket fits a wide variety of applications. It has a 8mm clearance mounting hole and an 18mm socket hole.
Available in black or silver anodized finish. more here...
|
|
Quantity in Basket:
None
|
|
|
 |
|
|
| |
This bracket fits a wide variety of applications. It has a 8mm clearance mounting hole and two properly spaced 18mm socket holes. Available in Black Anodized. more here...
|
|
Quantity in Basket:
None
|
|
|
 |
|
|
| |
Our "L" Bracket is used when there is a snug area to mount in. Provides extra length for clearance. Comes with an 8mm clearance hole for mounting. more here...
|
|
Quantity in Basket:
None
|
|
|
 |
|
|
| |
Used on rearsets that bolt on from underneath. Rearward facing when installed on the left side of the vehicle. more here...
|
|
Quantity in Basket:
None
|
|
|
 |
|
|
| |
Used on rearsets that bolt on from underneath. Front facing when installed on the left side of the vehicle. more here...
|
|
Quantity in Basket:
None
|
|
|
 |
|
|
| |
Originally developed for older Moto Guzzis, this bracket fits a wide variety of applications. It has a 8mm clearance mounting hole and an 18mm socket hole. Black anodized finish. more here...
|
|
Quantity in Basket:
None
|
|
|
 |
|
|
| |
Originally developed for older Moto Guzzis, this bracket fits a wide variety of applications. It has a 8mm clearance mounting hole and an 18mm socket hole. Black anodized finish. more here...
|
|
Quantity in Basket:
None
|
|
|
|
|
