ELECTRICAL CONNECTION TURN SIGNAL CONVERSION KIT 1156 SPECIAL APPLICATIONS 01314 

Electrical Connection Turn Signal Conversion Kit 1156 Special applications 01314

Product Code: 17095 Price: Check Latest Think of this - your rear turn signal housings are illuminated only when the turn signal is flashing. These are dead lights the rest of the time. Our signal kits simply, easily and legally will make those dead housings additional red running and brake lights the rest of the time. On some bikes, it effectively DOUBLES the size of your rear running and brake lights without adding any additional housings. It does not alter the operation of the turn signals and the red light shuts off when the amber signal comes on. Other kits make your signal lights into full time running lights and signals, but in amber - ILLEGAL on any motor vehicle and much more expensive than our kit plus NO brake lights!. No dying or replacement of the lens is required either. This kit was designed to add additional lighting after dusk when it is needed most. Priority of illumination as follows (first is highest and overrides all others): 1. Turn Signal 2. Brake Light 3. Running Light This kit is designed for a stem mounted housing. The housing must have an 1156 or 1073 sized bulb which is inserted straight into the base - this is the most popular design. A special composition grommet (to accommodate the intense heat the turn signal bulb produces) sits on the bulb and acts as the mounting base for the circuit board. Our setup uses Ultra-Bright LED's to achieve the red color through the amber lens. Small separate circuits take brake and running light inputs and for each signal sending all information through 2 wires to each LED board. Add additional lighting without adding additional light housings! Electrical Connection Part# 01314 recommended for: Harley Dyna, V-Rod Honda GL1100 Indian All (stock Only) Kawasaki Concours